Wayne-Dalton 46 Manuel du propriétaire télécharger pdf (Page 30)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Tools Needed:

Hook the sheave fork through the front

loop of the extension spring and attach

the sheave fork to the rear 3” steel

sheave using (1) 3/8” -16 x 1-1/4” hex

head bolt and (1) 3/8”-16 hex nut.

Thread the counterbalance cable over

the front sheave, around the spring

sheave and tie the special knot around

the “horizontal angle” 3 hole clip.

Insert one end of the large “S” hook in

the “horizontal angle” 3 hole clip and

the other end in the second slot of the

horizontal angle.

Repeat for the other side.

IMPORTANT: Close “S” hooks and eye

bolts to prevent springs from coming

loose.

FAILURE TO CLOSE “S” HOOKS

AND EYE BOLTS CAN RESULT IN

SEVERE INJURY OR DEATH IN

CASE SPRINGS COME LOOSE.

NOTE: Some larger doors feature 2 pairs

of extension springs. A snubber cable

must be installed through each spring

WARNING

DOOR FEATURING 2 PAIRS OF EXTENSION SPRINGS

HORIZONTAL TRACK

HOOK PLATE

STEEL SHEAVE

SHEAVE FORK

SNUBBER

CABLE

STEEL SHEAVE

3/8”-16 X 1-1/4”

HEX HEAD BOLT

SHEAVE FORK

COUNTERBALANCE

CABLE

3 HOLE CLIP

SPECIAL KNOT

COUNTERBALANCE

CABLE

FRONT SHEAVE

COUNTERBALANCE

CABLE

“S” HOOK

SECOND

SLOT

3/8”-16

HEX NUT

3 HOLE CLIP

COUNTERBALANCE

CABLE

Attaching Spring Sheaves

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Wayne-Dalton 46 Manuel du propriétaire Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Ouvreur de porte de garage Wayne-Dalton 46