Wayne-Dalton 46 Manuel du propriétaire télécharger pdf (Page 16)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Tools Needed:

NOTE: For door section identiﬁcation see

page 4.

Located the bottom section, (2) #1

hinges for the end stiles and enough #1

hinge(s) for each of the center stile(s).

Place the hinge on the section so that

the lower (numbered) leaf of the hinge

is over the pre-punched holes in the end

stiles and center stile(s) at the top of the

section.

Secure the hinges to the section using

(2) 1/4”- 14 x 5/8” self tapping screws

each.

Insert roller into appropriate end hinge

tube.

Repeat for all sections except the top

section.

Use (2) #2 end hinge(s) and the required

number of #1 hinges for each of the

center stile(s) on the lock section

(second section).

Use (2) #3 end hinges and the required

number of #1 hinges for each of the

center stile(s) on the intermediate

section (third section).

If installing a ﬁve section door, use (2) #4

end hinges and the required number of

#1 hinges for each of the center stile(s)

on the intermediate II section (fourth

section).

IMPORTANT: WHEN PLACING ROLLERS

INTO END HINGES NUMBER 2 AND

HIGHER, THE ROLLER GOES INTO TUBE

FURTHEST AWAY FROM SECTION.

IMPORTANT: ONCE FASTENER IS

SNUG AGAINST HINGE LEAF, TIGHTEN

AN ADDITIONAL 1/4 TO 1/2 TURN TO

RECEIVE MAXIMUM DESIGN HOLDING

POWER.

Hinges

Power Drill

7/16” Socket

Driver

END STILE HOLE

PATTERN

(LEFT SIDE IS SHOWN.

RIGHT SIDE IS

OPPOSITE.)

#1 HINGE #2 END HINGE

#3 END HINGE #4 END HINGE

CENTER STILE

HOLE PATTERN

ROLLER

PLACEMENT

ROLLER

PLACEMENT

ROLLER

PLACEMENT

HINGE

(2) 1/4”- 14 X 5/8”

SELF TAPPING

SCREWS

CENTER STILE

(2) 1/4”- 14 X 5/8”

SELF TAPPING

SCREWS

HINGE

END STILE

END HINGE PLACEMENT

CENTER HINGE PLACEMENT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Wayne-Dalton 46 Manuel du propriétaire Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Ouvreur de porte de garage Wayne-Dalton 46