Wayne-Dalton 46 Manuel du propriétaire Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
13
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INSTALLATION
NOTE: If you have quick install jamb
brackets, skip this step and complete
Step 5.
NOTE: If you have riveted track, skip this
step.
The bottom jamb bracket is always the
shortest bracket included with your door.
If three jamb brackets are included with
you door, the bottom center bracket
is the middle bracket in height. The
top jamb bracket is the tallest bracket
included.
To attach the bottom jamb bracket,
locate the lower hole/slot pattern of the
vertical track. Align the slot in the jamb
bracket with the lower hole of the hole/
slot pattern in the vertical track. Secure
jamb bracket, using
(1) 1/4”- 20 x 9/16” track bolt and (1)
1/4”- 20 flange hex nut.
Place the center jamb bracket over
the hole/slot pattern that is centered
between the bottom jamb bracket and
flagangle. Align the slot in the jamb
bracket with the lower hole of the hole/
slot pattern. Loosely fasten the bracket
onto the track with (1) 1/4”- 20 x 9/16”
track bolt and (1) 1/4”- 20 flange hex
nut.
Repeat if a third jamb bracket is
required, equally spacing the distance
between the two center jamb brackets
and the bottom jamb bracket and
flagangle.
NOTE: Doors over 7’3” high get (3) sets
of jamb brackets.
NOTE: The bottom jamb bracket is the
shortest in length that is included with
your door. It does not necessarily mean
the “short” (ST-0) jamb bracket.
NOTE: After completing this step,
continue with Step 6.
4
Installing Fully Adjustable
Jamb Brackets
1ST SET
3RD SET
JAMB
BRACKET
HOLE/SLOT
PATTERN
1/4”- 20 X
9/16”
TRACK BOLT
1/4”- 20
FLANGE
HEX NUT
JAMB BRACKET
VERTICAL
TRACK
VERTICAL
TRACK
None
2ND SET
ST-0 ST-1
ST-2 ST-3
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire