Wayne-Dalton 46 Manuel du propriétaire télécharger pdf (Page 28)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Tools Needed:

Using (1) 3/8” - 16 hex nut, attach the

front steel sheave in the appropriate

hole (left hand shown).

3” STEEL SHEAVE WITH 12” RADIUS

TRACK:

Bolt the sheave to the 13/32” hole near

the top of the ﬂagangle.

3” OR 4” STEEL SHEAVE WITH 15”

RADIUS TRACK:

Bolt the sheave to the ﬁrst 13/32” hole

in the horizontal angle.

Repeat for other side.

Remove the locking pliers from the

vertical tracks. With assistance, raise

the door slowly into the open position

making sure the door travels smoothly

through the track.

Clamp locking pliers to the back leg of

both horizontal tracks, below the bottom

rollers to keep the door from lowering.

3/8- 16”

HEX NUT

STEEL

SHEAVE

12” RADIUS TRACK

WITH 3” STEEL SHEAVE

HOLE LOCATION

15” RADIUS TRACK WITH

3” OR 4” STEEL SHEAVE

HOLE LOCATION

FLAGANGLE

HORIZONTAL

ANGLE

Attaching Front Sheaves

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Wayne-Dalton 46 Manuel du propriétaire Page 28